Fresh Listing from Deep Blue Energy Services Limited [7 Positions] - Jobs in Nigeria

Fresh Listing from Deep Blue Energy Services Limited [7 Positions]

Posted on :

10 Aug, 2016

Category :

Oil & Gas Jobs in Nigeria

Deep Blue Energy Services Limited (DBESL), is a resource and solution management company that specializes in assisting international/Local companies in identifying Potential market opportunities, assisting with permits, sourcing highly skilled employees, bidding on and negotiating contracts and navigating the often complex political and policy environment of many sub Saharan African countries.

We are recruiting to fill the following vacant positions below:

Job Title: Radar/Radio Operator
Location: Nigeria
Job Type: Full-Time

Job Description

  • The  Radar  /Radio  Operator  will  be  responsible  for  the  surveillance  monitoring  of  the  maritime situations in and around the Field.

He reports to the Maritime Security Advisor  /Port Facility Security Officer/Marine Ops Manager while carrying out the  following duties:

  • Maintain all round radar surveillance of the common Field 10Nm radius of the FPSO
  • Monitor the field security layout under the responsibility of the OIM/RSES
  • Observe and report the Maritime traffic situations around the field
  • Provide appropriate challenge and response for effective security interventions
  • Monitor and assign sporting sectors for effective security cover and patrols
  • Operates the radio link between the shore/air/sea and the FPSO,
  • Performs radio watch, and ensures transmittals of ingoing and outgoing messages
  • Monitor helicopter arrival/despatch operations to/from base station and metrological information
  • Any other duties that may be assigned from time to time by the MSA/PFSO
  • Operate the surveillance radar and perform 12hour lyradar watch (2 watch system)
  • Maintain periodic radio checks with the security boats and working vessels in the field
  • Direct incoming and outgoing traffics through assigned sector of approaches
  • Maintain accurate logof Maritime situations and interventions in the field.
  • Take active part in the field security drills and exercises
  • Operates the communication equipment when required (ex:emergency),
  • Stand by radio, emission of outgoing messages,as instructed by the Marine Superintendent/MOM
  • Liaises with helicopter(s) and allfield vessels’ spread,
  • Receives and communicates to the MOM and/or Marine Superintendent any incoming messages related to their area of operations,
  • Any other duties that may be assigned from time to time by the Marine Superintendent/MOM
  • Operates FPSO marine radars/radios for surveillance monitoring of the common MEZ
  • Carryout Operational maintenance of radar and associated equipments on board
  • Undertake radar/radio awareness training/technical instructions to personnel
  • Ensure radar/radio contacts, challenge and reporting including accurate logging of events
  • Maintains records of charts/marine publications associated with client’s site

Safety:

  • Encourage culture of HSE among team members by prompt a nomaly reporting and closeout.
  • Maintain continuous awareness of hazards and surroundings and propose ways of improvement.
  • Comply with office security, health and safety rules, instructions and procedures.
  • Take care of colleagues’safety and behaviour without hesitating to intervene decisively
  • Rotation status: 2 weeks on/2 weeks off (B2B). Offshore environment.

Qualifications

  • Minimum one year of experience as a radio operator
  • Radar/ARPA/AISTraining with excellent operating experience
  • GMDSS General Operators Certificate is desirable
  • CAA  Radio Operators Certificate or Equivalent  (VHF Airband Operator)
  • CAA Offshore Meteorological Observer Certificate or equivalent is an advantage,
  • Proficient with Microsoft Office and Excel software,
  • Good BOSIET and Medical Certificate
  • Language: English

 

Job Title: Driver
Location:
Nigeria
Job Type: Full-Time

Job Descriptions

  • Drives the employee
  • Detects and carries out repairs when required
  • Follow traffic rule for safe driving
  • Cleans the car regularly
  • Go on messages
  • Checks all the relevant documents that comprise driving license, vehicle registration dociment, insurance document, etc and know their expiry date for renewal
  • Picks and delivers mails
  • Check the tires, brakes and other safety equipment before taking any employee out
  • Check the oil and fuel levels in the car
  • Communicate properly with the Principal and employees
  • Submit report to management in case of vehicle malfunctioning
  • Park the car in proper area for easy boarding of passengers
  • Maintain the driver’s log.

 

Job Title: HSE/Fire Watch
Location:
Nigeria

Job Description

  • Shall be responsible to manage and coordinate the HSE activities on site.
  • Shall be responsible to develop and prepare Job Safety Analysis in conjunction with work teams and Works leader.
  • Manage HSE Induction for personnel on arrival to Platform
  • Shall champion ANOMALY reporting and analysis from work team.
  • Shall be responsible to watch and take necessary precaution before, during and after any hot work (welding).
  • Shall make available necessary fire preventive accessories in any welding workplace.
  • Shall be a Safety guard during any welding operation.
  • Shall make report of any anomaly observed to the HSE Officer.
  • Manages day to day activities within his specific discipline
  • Verifies that all procedures, specifications and standards are followed
  • Follows performance of works on site (respect of specification and best practices)
  • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
  • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
  • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
  • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
  • Ensures awareness with KPI requirements
  • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
  • Shall ensure that the work place is safe, fit for all hot work activities.
  • Shall be conversant with basic ethics aimed at controlling quality of works
  • Undertakes any other duties which may be required (with inindividuals)

Qualifications

  • Diploma holder and must be computer literate
  • Basic Fire fighting Awareness training
  • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production
  • Industry preferably on an FPSO.
  • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
  • Shall be conversant with basic ethics aimed at controlling quality of works
  • Shall be in involved in ensuring safety of self and others on site
  • Ability to work in a large multinational team
  • Ability to work independently while maintaining good relations with colleagues and others
  • Physical ability to work on offshore installations in the climatic conditions of the site

 

Job Title: Piping/Structural Works Foreman
Location:
Nigeria

Job Description

  • Responsible for the health, safety and welfare of his team.
  • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
  • Manages day to day activities within his specific discipline
  • Provides technical knowledge, expertise and supervision for welding, cutting and rigging
  • Verifies that all procedures, specifications and standards are followed
  • Ensures works preparation before site works performance (survey, isometrics verifications, materials/tools preparation/supplies, access, lifting, prefabrications, logistics…)
  • Follows performance of works on site (respect of specification and best practices)
  • Responsible of QA/QC for his discipline
  • Inspects the performed works or follows inspection done by COMPANY
  • Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
  • Assists the planning team by giving any technical support for Akpo Fabric Maintenance preparation of the jobs in his discipline
  • In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects – Replaces the unusable materials
  • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
  • Manages the specific team of technicians (welders, fitters, riggers …) within your discipline.
  • If requested, identify additional resources
  • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
  • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
  • Ensures that all daily, weekly and monthly reports are completed as required.
  • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
  • Ensures that any faulty or damaged equipment is quarantined and details are reported where required, assists with methods support and return information to the relevant representative.

Qualifications

  • Bachelor/ College Degree
  • At least 5 to 10 years of experience in manufacturing, fabrication, welding and cutting
  • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
  • Experience and knowledge of metallurgy, welding procedure & specifications, and QA/QC related to his discipline Akpo Fabric Maintenance Service
  • Specific professional knowledge: CMMS : SAP/R3,
  • Ability to work in a large multinational team
  • Ability to work independently while maintaining good relations with colleagues and others
  • Physical ability to work on offshore installations in the climatic conditions of the site

 

Job Title: Mechanical Fitter
Location: Lagos, Nigeria
Job type: Contract

Job Descriptions

  • Take measurements and fabricate according to the designs.
  • Read and interpret details from Isometric drawings, GAs P&IDs, Pipe Support drawings etc.
  • Identify piping materials and fittings
  • Complete joint preparation based on approved PQR/WPS
  • Responsible to arrange and organize relevant materials and accessories for proper fit-up and fabrication.
  • Manages day to day activities within his specific discipline
  • Verifies that all procedures, specifications and standards are followed
  • Follows performance of works on site (respect of specification and best practices)
  • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
  • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
  • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
  • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
  • Ensures awareness with KPI requirements
  • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
  • Shall ensure that the work place is safe, fit for all hot work activities.
  • Shall be able to interpret an approved PQR/WPS
  • Shall be conversant with basic ethics aimed at controlling quality of works
  • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.

Qualifications
The holder of this position must have the following qualifications:

  • Diploma holder with ASME/API code qualification (WQT)
  • At least five years experience as a pipe/structural fitter in the oil and gas industry.
  • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
  • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
  • Shall be able to read and interpret details from Isometric drawings, GAs P&IDs, Pipe Support drawings etc.
  • Shall be able to identify piping materials and fittings
  • Shall be able to complete joint preparation based on approved PQR/WPS
  • Shall be responsible to arrange and organize relevant materials and accessories for proper fit-up and fabrication.
  • Shall be able to take Measurements and fabricate according to the designs.
  • Shall be conversant with basic ethics aimed at controlling quality of works
  • Shall be in involved in ensuring safety of self and others on site
  • Ability to work in a large multinational team
  • Ability to work independently while maintaining good relations with colleagues and others
  • Physical ability to work on offshore installations in the climatic conditions of the site
  • Working language: English mandatory, French is an advantage

 

Job Title: Painting/Blasting Foreman
Location:
Nigeria

Job Description

  • Responsible for the health, safety and welfare of his team
  • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating
  • procedures and standard industry practice during performance on painting operations placed under his responsibility
  • Manages day to day activities within his specific discipline (scheduling, personnel assignment, material management…)
  • Responsible for respect of blasting and painting/coating specifications
  • Applies and verifies the surface preparation following relevant specifications and best practices
  • Provides technical knowledge, expertise and supervision of blasting and painting operations
  • Verifies that all procedures, specifications and standards are followed
  • Inspects surface preparation before painting operations
  • Inspects painting products application in term of QA/QC (in particular verifies type of products applied and relevant thickness- wet & dry)
  • Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
  • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
  • In charge to manage, monitor and maintain the painting products materials stored on site and ensures that all painting products and materials are stored in good conditions and free from defects – Replaces Akpo Fabric Maintenance the unusable materials
  • In charge to update and maintain on site painting products/material register.
  • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
  • If requested, identify resource requirements and deploy as necessary to safely liquidate specific scopes of work.
  • Ensures that day to day requirements are met with regards to Scope, specifications and best practices,
  • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation. .
  • Ensures that all daily, weekly and monthly reports are completed as required.
  • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
  • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
  • Ensures that any faulty or damaged equipment is quarantined and details are reported
  • Where required, assists with methods support and return information to the relevant representative.
  • Ensures awareness with KPI requirements
  • Ensure that all members of the team are focused on delivery of HSE and Quality plans.

Qualifications

  • Diploma and/or Degree holder
  • At least 5 to 10 years of experience in blasting/painting activities in industrial context
  • NACE 2 certification or equivalent AQCPA – FROSIO
  • Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
  • Specific professional knowledge: CMMS : SAP/R3,
  • Ability to work in a large multinational team
  • Ability to work independently while maintaining good relations with colleagues and others
  • Physical ability to work on offshore installations in the climatic conditions of the site

 

Job Title: Welder
Location: Lagos
Job type: Contract

Job Descriptions

  • Shall be responsible for the pre-inspection of the welding Machine and its accessories prior to usage.
  • Shall ensure that the work place is safe, fit for all hot work activities.
  • Shall be able to interpret an approved PQR/WPS
  • Shall carry out Welding Operation in accordance to the quality requirements for the scope and PQR/WPS.
  • Shall be conversant with basic ethics aimed at controlling quality of works
  • Manages day to day activities within his specific discipline
  • Verifies that all procedures, specifications and standards are followed
  • Follows performance of works on site (respect of specification and best practices)
  • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
  • In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects – Replaces the unusable materials
  • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
  • Ensures that day to day requirements are met with regards Scope,
  • Tool and means and onsite risk assessments.
  • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
  • Shall be responsible for the pre-inspection of the welding Machine and its accessories prior to usage.
  • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
  • Ensures awareness with KPI requirements
  • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
  • Shall ensure that the work place is safe, fit for all hot work activities.
  • Shall be able to interpret an approved PQR/WPS
  • Shall carry out Welding Operation in accordance to the quality requirements for the scope and PQR/WPS.
  • Shall be conversant with basic ethics aimed at controlling quality of works
  • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.

Requirements
The holder of this position must have the following qualifications:

  • Diploma holder with ASME/API code qualification (WQT)
  • At least five years experience as a pipe/structural welder in the oil and gas industry.
  • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
  • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
  • Shall be in involved in ensuring safety of self and others on site
  • Shall be conversant with basic ethics aimed at controlling quality of works
  • Ability to work in a large multinational team
  • Ability to work independently while maintaining good relations with colleagues and others
  • Physical ability to work on offshore installations in the climatic conditions of the site

Application Deadline: Each job varies. Visit website to find out exactly.

How To Apply
Interested and qualified candidates should send their Resume to: [email protected] , [email protected]

or apply online via the link below

Comment on this Job

Like Us: