Location(s): Nigeria<\/p>\n
Specialization: \u2022 Oil and Gas \u2022 Industrial Training<\/p>\n
Industry: \u2022 Oil and Gas \/ Power and Energy<\/p>\n
Application Deadline: 23\/01\/2017<\/p>\n
Job Details<\/strong><\/p>\n A reputable Oil and Gas servicing company, a lead contractor to ExxonMobil, Total, Shell, Chevron, Agip, FMC, etc is hereby recruiting into the underlisted job posts:<\/p>\n Activities: <\/strong><\/p>\n GENERAL DESCRIPTION :<\/strong><\/p>\n MAIN FUNCTIONS (applicable to all specialities)<\/strong><\/p>\n Purpose<\/strong><\/p>\n Qualifications Required<\/strong><\/p>\n NOTE: APPLICANT MUST HAVE DETAILED KNOWLEDGE AS LISTED BELOW;<\/strong><\/p>\n MECHANICAL TECHNICIAN<\/strong><\/p>\n Theoretical knowledge<\/strong><\/p>\n Petroleum:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Have a basic understanding of facilities \/ process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia\u2026).<\/p>\n Computer:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to produce a report using Word, be able to perform simple calculation with Excel. Have been introduced to internet and mails.<\/p>\n Physics:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understanding and use of basic laws and units of physic (Newton\u2019s law, forces, mass, energy\u2026). Be knowledgeable of materials \/ steels characteristics (use, resistance, corrosion and its prevention).<\/p>\n Engineering:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to read and use drawings (P&ID\u2019s, PFD\u2019s, Isometrics), vendor documents (be able to determine tolerance and adjustment figures), name plate and data sheet. Be able to draw accurate sketches and item to scale.<\/p>\n Equipment:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand the working principles of main mechanical equipment: filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valves types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps). Be fully familiar with lubrification requirements and the different type of lubricants.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be sensitized for each of those to their preventive maintenance tasks and purposes.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be aware of CBM (vibration and oil analysis) requirement and purpose.<\/p>\n Maintenance:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand preventive, corrective maintenance and maintenance plan concepts. Have a basic knowledge of the CMMS (be able to issue a notification, read, interpret and complete work orders\u2026). Be able on a given and simple preventive work order to prepare tools, identify spare parts and adapted procedure or work instruction.<\/p>\n Practical skills<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Know how to select, use and maintain all the mechanical hand tools (all types of keys, files, drills, callipers, taps\u2026). Be able to use measuring tools (micrometer, vernier, gauges\u2026), torque wrench and fastener.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to operate and maintain pneumatic drills or grinders. Be able to use workshop equipment (pedestal drill, hydraulic press\u2026), in particular machining and tooling.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Know how to use basic lifting gear (chain block, slings\u2026). Be trained to complete simple \/ basic lifting operation.<\/p>\n Maintenance know-how<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to follow maintenance route and fill up associated check-up list (monitoring of rotating equipment). Be able to carry out lubrication routine and top up as required with the correct lubricant.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to prepare and install any type of flange gasket. Complete bolting following methodology.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to align V-belt, pulley and tension belts following methodology.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 For common types of valves be able to overhaul them and carry out minor adjustments while in service (tightening of gland packing).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 For gear box, be able to align gears, inspect & identify faults.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 For rotating equipment, be able to assist in diagnosis faults and failures, assist in alignment (prepare, cut shim material for alignment, level\u2026). Be able to assist in the removal and replacement of any type of bearing. Check the clearance.<\/p>\n Safety at Work<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be knowledgeable of electrical habilitation requirements and be certified as required.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be aware of permit to work, electrical and mechanical isolations requirements. Be aware of gas test requirement.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be knowledgeable of area classification and Ex materials requirements.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be knowledgeable of PPE requirement and MSDS.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand hazards associated to leak tests and hydrotests.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be aware of colour coding & certification requirements for lifting equipment. Correctly report anomalies, accidents, near misses<\/p>\n INSTRUMENTATION TECHNICIAN<\/strong><\/p>\n Theoretical knowledge<\/strong><\/p>\n Petroleum:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Have a basic understanding of facilities \/ process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia\u2026).<\/p>\n Computer:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to produce a report using Word, be able to perform simple calculation with Excel. Have been introduced to internet and mails.<\/p>\n Physics:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understanding and use of basic laws and units of physic (temperature, pressure, volume, density; specific gravity\u2026).<\/p>\n Engineering, be able to:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Read and use drawings (P&ID\u2019s, ESD matrix and loop diagrams), vendor documents, name plate, datasheets. Be knowledgeable of instrument symbols.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand regulation principles and be able to analyse them (differentiation in between cascade, split range, simple).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand basic logic concepts (AND\/OR\u2026).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Have a basic understanding of PCS, F&G, and ESD systems. Understand inhibit, alarm and trip concepts.<\/p>\n Equipment:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand working principle of basic instruments: level and interface level transmitters, thermocouples, manometers, vibration probes, metering devices (orifice plate, coriolis, turbine, volumetric).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Have basic knowledge in pneumatics and hydraulic distribution as well as electrical engineering (SOV, timer, relay\u2026).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand manual and automatic valves (including PSV) principle and command (positioner\u2026).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be familiar with all types of F&G detection (fusible loop, UV\/IR, gas, smoke);<\/p>\n Maintenance:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand preventive, corrective maintenance and maintenance plan concepts. Have a basic knowledge of the CMMS (be able to issue a notification, read, interpret and complete work orders\u2026). Be able on a given and simple preventive work order to prepare tools, identify spare parts and adapted procedure or work instruction.<\/p>\n Practical skills<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Know how to select and use the necessary hand tools. Properly operate, maintain and use the available set of workshop tools.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Correct use and handling of tubing, compression fittings, gaskets, \u201cO\u201d rings, cable glands\u2026<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Correct use and handling of multimeters, calibration unit, hydraulic pumps, deadweight tester, temperature bath, smart calibrator.<\/p>\n Maintenance know-how<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to complete a loop test from a transmitter \/ valve, SOV, limit switch, etc\u2026 to input \/ output of PCS\/SSS.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to calibrate a valve positioner.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Gauges & transmitters (pressure, level, temperature and flow): be able to install, remove, calibrate, and test most common types of devices.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 F&G detection: check, calibrate, test most common type of Fire & Gas detectors (be able to ensure inhibits are in place).<\/p>\n Safety at work<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be knowledgeable of electrical habilitation requirements and be certified as required.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be aware of permit to work, electrical and mechanical isolations requirements. Be aware of gas test requirement.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be knowledgeable of area classification and Ex materials requirements.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be knowledgeable of PPE requirement and MSDS interpretation.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Correctly report anomalies, accidents, near misses.<\/p>\n ELECTRICAL\/HVAV TECHNICIAN<\/strong><\/p>\n Theoretical knowledge<\/strong><\/p>\n Petroleum:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Have a basic understanding of facilities \/ process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia\u2026).<\/p>\n Computer:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to produce a report using Word, be able to perform simple calculation with Excel. Have been introduced to internet and mails.<\/p>\n Physics:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understanding and use of basic laws and units of physic (resistance, inductance, DC & AC current and voltage, frequency, active and reactive power\u2026). Be able to differentiate low and high voltages.<\/p>\n Engineering:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to read and use drawings (single line and schematic diagrams), vendor documents, name plate. Be knowledgeable of electrical symbols.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Possess notions on cable sizing and voltage dropping.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able familiar with a general facilities electrical network philosophy: main generation, emergency generator, switchboard and UPS. Have a basic understanding of inter-tripping and interlocking action, load shedding and load sharing modes.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 For electrician technicians only, have a basic understating of cathodic protection system.<\/p>\n Equipment:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand working principle of main electrical equipment: voltage & current transformers, electrical motor, alternator, feeder, UPS, battery, speed variator soft starter and graduator, HV\/LV switchboard, lighting and heat tracing panel\u2026 For those, be aware of their preventive maintenance requirements. Be aware of CBM (thermography) requirement and purpose.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand principles and know the different systems of earthing (IT, TT, TN and DC unearthed system).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Have a basic knowledge of working principle of a PLC. Logic diagram with module: AND\/OR, NAND\/NOR, clock, delay, latch, memory, micro processor… Understand inhibit, alarm and trip concepts.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand the principle of electrical protection: short circuit, over load, earth fault, reverse power, transformer, alternator and motor specific protections.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be knowledgeable on explosion proof materiel and associated requirements.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 For electrician technicians only and for high voltage panel: be able to identify all cubicles and their equipment. Understand interlocking systems in between cubicles.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 For HVAC technicians only, understand working principle of HVAC equipment with different technology (chiller and reciprocating compressor, split units\u2026).<\/p>\n Maintenance:<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Understand preventive, corrective predictive maintenance and maintenance plan concepts. Have a basic knowledge of the CMMS (be able to issue a notification, read, interpret and complete work orders\u2026). Be able on a given and simple preventive work order to prepare tools, identify spare parts and adapted procedure or work instruction.<\/p>\n Practical skills<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Know how to select and use the available and necessary hand tools for electrician (including special insulated tools).<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be familiar with construction practise: laying, pulling and connecting cables (using cables glands, terminals blocks, cable lugs, bus bar, sealing compound\u2026)<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Correct use and handling of multimeters, clip on ammeters, Ohmmeter, earth tester (megger), earth leakage kit and recorder<\/p>\n Maintenance know-how<\/strong><\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to maintain and troubleshoot small electrical installation like lighting and heat tracing circuit.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to identify the different types of cables (including ground ones) connect those properly (using lugs) and perform their proper laying (in trenches, on cable tray\u2026). Select, use and install the appropriate cable glands and tags.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to do preventive maintenance on non-critical equipment: batteries, motor, alternator, breaker, transformer, contactor and switchboard.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to test and verify alarms, trip and interlock settings.<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Be able to perform insulation and continuity tests<\/p>\n –\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 LV Electrical equipments: be able to dismantle, replace defective parts, reassemble, reconnect and check the system. Identify all accessories.<\/p>\n\n
\n
\nReview MRP.<\/li>\n\n
\n